Quality compliance

Barber Wilsons fittings are made to comply with BS1010 and BS5412. Many of our fittings are sent for testing to the WRc Evaluation & Testing Centre and, therefore, comply with the requirements of the current water byelaws.

In order to comply with the water byelaws, all fittings incorporating hand held showers have backflow prevention devices fitted. Sink mixers with single flow nozzles have listed single check valves fitted upstream of both hot and cold water inlets.

All finishes are electroplated to the following British Standards: Chrome to BS1224, Inca to BS4292.

Current listings include:

Model Number Certificate Number IRN Number Water Byelaws
GA or R 2123, 2124, 106 0307050 001, 005 N/A

GA or R 2134

0307051 001, 005 N/A

GA or R 4300, 4308

9912071 109, 112 16, 18

GA or R 3300, 3308

9812050 101, 109 25, 16, 18

GA or R 1870

9812049 001, 140 19, 20, 21

GA or R 6450, 6455

9812051 101 25

GA or R 6470

9505018 101 25

MC 6470

9105006 101 25

MC 1870

9105016 140 19, 20, 21

RFC1070, GA or R 1070AE Single Flow Swanneck

0002014 101 N/A

GA or R 1070 Duoflow Swanneck

9402004 000 N/A

MC 3460

9002008 101, 109, 111 25, 16, 18, 29, 58, 73

MC 3300, 3308

9002009 101,109 25, 16, 18

MC 4300, 4308

9912071 109, 112 16, 18

MC 2123

9002014 000 N/A

MC 2134

9002015 000 N/A

5600, 5651 Valves

0210040 001, 103,111 17, 29, 58, 73

GA or R 1010AE, 2010AE, 2015AE Single Flow Swanneck

0202028 001, 006 N/A

RFC 1010AE Single Flow Swanneck

0202028 001, 006 N/A

GA or R 1010, 2010, 2015 Duoflow Swanneck

9306004 000 N/A
GA or R 6475 0012032 001, 101 25

top of page

Guarantee

We will make good, free of charge, by repair or at our option by replacement, any defective goods becoming evident within a period of 12 months of purchase and arising from defects which are attributable to us as manufacturers. We cannot be held responsible for any costs incurred in correcting installation-related faults, and problems with electroplated and polished finishes when our cleaning instructions are not adhered to

top of page

Cleaning

We recommend that all inca, nickel and chrome finishes are cleaned as follows:
After use rinse clean and dry with a soft cloth. Do not use cream or chemical cleaners. By following this procedure, limescale should not form, any problems of this nature, however, should be referred to the suppliers.

We also supply fittings in natural polished brass. This is not lacquered or electroplated and will tarnish naturally. To maintain the polished finish metal polish should be used.

top of page

Continual improvement

Barber Wilsons & Co Limited is constantly seeking ways to improve the specifications, design and production of its products and alterations take place continually. Whilst every effort is made to produce up to date literature this brochure should not be regarded as an infallible guide to current specifications.

E & OE.

top of page

Conversion tables

 

Imperial
Metric
Foot Head
P.S.I.
Metre Head
Bar
Litres
Gallons
10
4.33
3.05
0.30
1
0.22
15
6.51
4.57
0.45
2
0.44

20

8.70
6.10
0.60
3
0.66
25
10.85
7.62
0.75
4
0.88
30
13.00
9.15
0.90
4.55
1.00
35
15.17
10.67
1.05
5
1.10
40
17.34
12.20
1.20
6
1.32
45
19.50
13.72
1.35
7
1.54
50
21.67
15.25
1.50
8
1.76
55
23.84
16.77
1.65
9
1.98
60
26.01
18.30
1.80
10
2.20
65
29.17
19.82
1.95
15
3.30
Imperial
Metric
Foot Head
P.S.I.
Metre Head
Bar
Litres
Gallons
Imperial
Metric
70
30.34
21.53
2.10
20
4.40

75

32.51
22.87
2.25
25
5.50
80
34.68
24.40
2.40
30
6.60

90

39.01
27.45
2.70
35
7.70
100
43.35
30.50
3.00
40
8.80

110

47.65
33.55
3.30
45
9.90
120
52.02
36.60
3.60
50
11.00

130

56.35
39.65
3.90
55
12.10
140
60.68
42.70
4.20
60
13.20

150

65.02
45.75
4.50
65
14.30
160
69.35
48.80
4.80
70
15.40

170

73.79
52.03
5.10
75
16.50
180
78.03
54.90
5.40
80
17.60
Foot Head
P.S.I.
Metre Head
Bar
Litres
Gallons
Imperial
Metric
Copyright © Dandelion by Pexeto